Fasteners, fixings & inserts feeding systems for automated production.
Screws, nuts, washers, rivets and threaded inserts presented to drivers, presses, assembly machines and robots.
Parts we can assess.
What the system must protect.
- Head-first or thread-first orientation
- Tangling and nesting control
- One-part release
- Reliable transfer to driver or insertion tooling
Vibratory bowl feeders may be one route to investigate.
Repeatable feeding of stable component families where a dedicated track can use geometry to reject incorrect orientations.
This is not a selection made from the sector name alone. Representative samples, the required orientation and the downstream cycle determine whether this or another technology is more credible.
Explore vibratory bowl feedersWrite the output condition before choosing the equipment.
Component state
Clean, dry, free-flowing and within agreed production variation.
Presentation
Face, leading feature, rotational orientation, pitch and datum.
Accepted rate
Sustained usable output over an agreed operating period.
Interface
Exact transfer point, I/O, safe state and recovery sequence.
Fasteners, fixings & inserts: feeder project questions
Useful starting points. Final recommendations are based on your component, presentation requirement and machine cycle.
What fasteners, fixings & inserts can be fed automatically?
Typical projects include screws, nuts, washers, rivets, threaded inserts, pins and spacers. Suitability depends on the exact geometry, material, finish, presentation and target rate.
Which feeding technology should be used?
The technology is selected from component behaviour and production requirements. A bowl, centrifugal, step or flexible feeder may be combined with bulk storage, tracks, vision and escapements.
Can inspection be added before the machine hand-off?
Yes. Sensors or vision can verify selected objective conditions. The visible feature, tolerance, lighting, decision rule and reject path must be established during the project.
Need screws delivered to a driver or robot?
See automatic screw feeding systems for pick-point, escapement and blow-feed project considerations.
Review your fasteners, fixings & inserts feeding application.
Send the part, presentation and production demand. We will help define the next technical step.